Controls > Products > Concrete > Hardened Concrete Testing > Concrete Specimen Molds > Verification Instruments for Molds and Specimens

Verification Instruments for Molds and Specimens

  • Flatness verification using straightedge and feeler strips
  • Verification of diameter using digital vernier caliper
  • Verification of a cube mould with Go/No go gauges
  • 82-C0106/1, 82-C0107/1, 82-C0108/1, 82-C0109/1, 82-C0110/1
  • 55-C0100/D
  • Flatness verification using straightedge and feeler strips
  • Verification of diameter using digital vernier caliper
  • Verification of a cube mould with Go/No go gauges
  • 82-C0106/1, 82-C0107/1, 82-C0108/1, 82-C0109/1, 82-C0110/1
  • 55-C0100/D

Our verification Instruments are designed to assess the flatness, perpendicularity and straightness of concrete molds and specimens.

Enquire Now

Our instruments are used to assess flatness, perpendicularity and straightness of test specimens and molds as specified by the EN 12390-1 Standard.

They are available, on request, complete with certificate of calibration issued by a competent authority such as NAMAS, ACCREDIA, COfrac etc.The identification labels 55-C0100/D, made from PVC, 100×60 mm in size, are used for writing the identification data.

The corners can be folded for immersion in the fresh concrete specimen.

Code
Description
55-C0100/ID
Identification labels for concrete specimens. Madefrom PVC, size 100x60 mm, foldable corners for immersion into fresh concrete. Pack of 100 pcs.
82-C0106/1
Go/no go gauges for 100 mm cube mould
82-C0106/2
Go/no go gauge for 150 mm cube moulds.
82-C0107/1
Engineers square 150 mm
82-C0108/1
Straightedge 300 mm
82-C0109/1
Digital vernier caliper, 155 mm
82-C0110/1
Set of feeler strip 90 mm long

Any question about the Verification Instruments for Molds and Specimens

"*" indicates required fields

Consent