Three Gang Moulds 40x40x160 mm, EN 196-1

• Individually checked with certified instruments
• All parts marked and identified
• Model 65-L0010/B has a minimum surface hardness of HV 400 and is surface protected with a rust inhibitor treatment. Supplied complete with traceable certificate of conformity.
• Both models can be fit with 65-L0010/5 pegs for determining the coefficient of thermal expansion conforming to EN 1770

Notes for proper use of molds:
The list below is by no means exhaustive but wants to give some recommendations for correct use of molds. For more information, please always refer to the user manual.

• Molds must be kept clean and free from residues. This is essential to extend the lifespan of the molds and prevent any defects on sample surfaces. Clean the molds of any residues within 24 hours after demolding to prevent encrustations.
• Before casting, it is strongly recommended coat the internal mold faces with a thin layer of a demolding agent (e.g. cod. C0139/A) that facilitates removal of hardened samples during demolding operations.

Notes for proper use of molds:
The list below is by no means exhaustive but wants to give some recommendations for correct use of molds. For more information, please always refer to the user manual.

• Molds must be kept clean and free from residues. This is essential to extend the lifespan of the molds and prevent any defects on sample surfaces. Clean the molds of any residues within 24 hours after demolding to prevent encrustations and rust.
• Before casting, it is strongly recommended coat the internal mold faces with a thin layer of a demolding agent (e.g. cod. C0139/A) that facilitates removal of hardened samples during demolding operations.