Marshall Compaction Molds
Marshall Compaction steel and corrosion-free molds are tailor-made for using with automatic compactors.
The three parts of the 4” compaction molds can be purchased individually (refer to the accessories section).
The 4” molds are conforming to ASTM D6926 (ex D1559) while the 6” molds are conforming to ASTM D5581. The compaction on 4” molds can also be performed manually (refer to the hand-compaction assembly).
| Model | 76-B0057 | 76-B0057/6 |
| Inside dia. | 101.6 mm (4”) | 152.4 mm (6″) |
| Mould cylinder height | 87.3 mm (3.44”) | 114.3 mm (4.5″) |
| Standards | ASTM D6926 ASTM D1559 EN 12697-10 EN 12697-30 | ASTM D5581 |
| Weight approx.: | 3.3 kg | 5 kg |
Code
Description
76-B0057
Standard Marshall compaction mould complete with 76-B0057/1 base plate, 76-B0057/A2 mouls body and 76-B0057/A3 filling collar
76-B0057/6
6'' Marshall compaction mould complete with base plate, mould body and filling collar. Suitable for use with 76-B446X compactor
Code
Description
Accessories
76-B0042/1
Steel block 100 mm dia x 50 mm height
76-B0043/4
Storage plate
76-B0057/B5
Extraction plate
76-B0060
4 in paper disc 101 mm. (pack of 1000)
Spare mould parts
76-B0057/1
Base plate suitable for 76-B0057 mould
76-B0057/A2
Mould body for 76-B0057 and 76-B0057/A
76-B0057/A3
Filling collar for 76-B0057 and B0057/A
You may also be interested in the following products
Any question about the Marshall Compaction Molds
"*" indicates required fields