Hydraulic Shrinkage mold with Measurement Apparatus
The Hydraulic Shrinkage mold with Measurement Apparatus is suitable for the determination of hydraulic axial shrinkage on concrete beams during hardening.
The shrinkage mold method is suitable for the determination of hydraulic axial shrinkage on concrete beams during hardening. According to this method, steel pins shall be glued on the head surfaces of the specimen in order to measure the dimensional changes of specimens properly stored in temperature and specified humidity conditions.
The test is performed with the 55-C0100/MB11 beam mold and the shrinkage measurement by the 55-C0115/3D apparatus.
Beam mold
Made of precisely machined cold finished steel , 100x100x500 mm
Weight approx.: 19 kg
Steel pins
To be glued on the beam ends surfaces
Shrinkage measurement apparatus
Metal stand, fitted with reference bar and digital gauge 25.4 x 0.001 mm, with output for PC. Cable not included. (See accessories)
Weight approx. 14 kg
You may also be interested in the following products
Any question about the Hydraulic Shrinkage mold with Measurement Apparatus
"*" indicates required fields