Specimen Curing, Curing Bath with Cooler Unit
This multi-purpose digital unit, fit with cooler unit and recirculating water system, is used to condition in water asphalt and cement specimens.
This multi-purpose digital unit, fit with cooler unit and recirculating water system, is used to condition in water asphalt specimens for Marshall and Indirect tensile test.
This multi-purpose unit, is used to cure in water cement specimens 40x40x160 mm, but can also be used for storing the hydrated samples at a temperature of 20°C (EN 196-8).
Internal surfaces are made of polished stainless steel with a sheet steel insulated outer case. The cooler unit is located under the water bath. Complete with re-circulating unit for temperature uniformity.
- Automatically maintains the set temperature
- Two channels electronic thermoregulator: heating/cooling with digital display
- Complete with re-circulating unit
- Incorporating refrigeration compressor
- A multi-purpose unit usable for many other applications
- Capacity: 40 litre and 70 cement specimens 40x40x160 mm
- Power: 2000 W
- Temperature range: +5 to +60°C
- Accuracy: ± 1%
- Inside dimensions: 550x360x200 mm
- Outside dimensions: 830x480x950 mm
- Weight approx.: 62 kg
Code
Description
65-D1409/A
Water bath with 2 channels thermoregulator (heating/cooling), submersed recirculating pump and cooler unit. 230V/50-60Hz/1ph.
65-D1409/AZ
Water bath with 2 channels thermoregulator (heating/cooling), submersed recirculating pump and cooler unit. 110V/60Hz/1ph.
You may also be interested in the following products
Any question about the Specimen Curing, Curing Bath with Cooler Unit
"*" indicates required fields
