Concrete/Rock Specimen Grinding Machine
The Concrete and Rock Specimen Grinding Machine is used to grind and polish concrete specimens, natural stones, ceramic materials.
Used to grind and polish concrete specimens, natural stones, ceramic materials, etc. Proposed in the following version:
- 55-C0201/C Automatic version in which the lateral displacement is fully automatic and controlled by travel limit switches.
All the other characteristics are identical.
The cube and cylinder specimens can be easily locked on the table and the grinding head, 330 mm dia., can be laterally moved either manually or automatically in both directions so, the only manual operation requested is the lowering of the grinding head by the top hand wheel.
The machine is supplied complete with safety chip guard that, when removed, stop automatically the machine, with coolant tank, motor pump and one set of abrasive sectors. Diamond grinding sectors are available on request (see accessories).
The 45-D0534/B and 45-D0534/C Core face preparation jigs can be easily fitted by the clamping element C0200/50 + C0201/10.
The machine is supplied without accessories for clamping the samples, which must be purchased separately.
- It’s used to grind concrete specimens, natural stones, tiles, block pavers, ceramic materials etc.
- It features a large base table for grinding contemporaneously up to three 100 mm cubes, or three 150 mm cubes, or two 200 mm cubes and concrete/tile blocks of various sizes (see drawing of working area).
- It works with cylinders up to dia. 160×320 mm
- Motorized lateral displacement in both directions completely automatic
- Safety guard with door locking switch conforming to CE
- Complete with clamping elements for cubes
- Suitable for dry grinding procedure. See accessories
- Diamond impregnated sectors available as alternative to abrasive
- Ideal for surface preparation of rock samples using the accessory 45-D0534/B and 45-D0534/C
Table dimension: 775 x 280 mm
Grinding head dia: 330 mm
Max vertical daylight: 350 mm
Min vertical daylight: 145 mm
Max specimen size: 200 mm cubes and 160 x 320 mm cylinders
Machined surfaces: see schematic representation
Grinding head stroke: 205 mm
N° of grinding segments: 10
Grinding wheel speed: 1400 r.p.m.
Automatic cross feed in both directions
Safety guard with door locking switch conforming to CE
Total power: 2200 W
Overall dimensions (lxwxh): 1200x1020x1640 mm
Weight: 350 kg approx.
Gross weight: 415 kg approx.
Accessories
Resource Center
Any question about the Concrete/Rock Specimen Grinding Machine
"*" indicates required fields
















