Our new Electromechanical Multipurpose 50 kN Load Frames are compact and versatile testers meticulously designed for laboratories wanting to perform high precision – or automatic, depending on the model – displacement and/or load controlled tests in a small space.

Our testers benefit from the environmentally-friendly Electromechanical technology that limits on-going maintenance, minimizes noise output – without any compromise on performance.

  • Environmentally Friendly and Quiet: EmS technology does not need any dead weights, large and noisy air compressors or hydraulic pumps, drastically reducing noise levels and general maintenance.
  • Multipurpose and Versatile: The 50kN capacity is sufficient to perform a wide range of common tests on asphalt mix, soil, cement and other materials, with a high load accuracy.
  • Fully Automatic (variable speed models only): All our testers automatically perform displacement controlled or stress-controlled tests and record all test data. All without any interventions from the operator.
  • High Performing: The rapid approach and return functions shortens test performance and streamlines the testing process.

SpeedLoader EMS – Automatic Electromechanical Variable Speed 50kN Tester

SpeedLoader is the entry level automatic and compact Electromechanical Multipurpose Load Frame ideal for laboratories who need to perform fully automatic displacement controlled tests. The 50 kN compression capacity and the variable test speed coupled with a Closed-loop displacement control make it easier to perform a wide range of test such as CBR, Marshall, Indirect Tensile and Uniaxial Compression tests.

MultiLoader EMS – Automatic Electromechanical Variable Speed 50kN Tester

MultiLoader is a versatile Electromechanical Multipurpose Load Frame for laboratories needing fully automatic performance and elaboration of displacement-controlled tests. Coupled to the compact dimensions, the seven channels for data acquisition, stand-alone automatic digital load frame and fully variable testing speed enable the operator to carry out a wide range of tests including the most common CBR, Marshall and Indirect tensile. This variable speed test includes 18 standard-compliant pre-set testing profiles and a 7’’ display for real time graph and test data viewing improving its usability.

UniFrame 50 EMS / UniFrame 50-T EMS – Automatic Electromechanical Universal 50kN Tester

Uniframe50 is the most flexible version in our range of Electromechanical Multipurpose Load Frames. Not only it can perform displacement and load-controlled tests, the addition of a large frame makes the Uniframe50 suitable for general-purpose testing such as CBR, Marshall, Triaxial, Flexural tests on concrete beams and tiles, Unconfined Compression, Punching tests, and many more thanks to the wide variety of accessories and software at your disposal. Uniframe50-T version also adds the possibility to perform tensile tests up to 25kN capacity.

BalancedLoader EMS – Automatic Electromechanical Universal 50kN Tester

BalancedLoader is the Advanced Electromechanical Multipurpose Load Frame fully dedicated to asphalt mix testing. The large touchscreen controller includes pre-set routines with automatic test result measurement for most of asphalt testing procedures, including the new Balanced Mix Design tests, such as IDEAL-CT, IDEAL-RT and Semi-Circular Bend (SCB).

Discover our Multispeed Testers

Marshall Tester – 50 kN Marshall Compression Tester

Marshall tester is a bench mounted compression frame with motor and worm gear housed within the base unit. The machine is designed to perform Marshall tests and all other compressive tests requiring a fixed compression speed of 50.8 mm/min, with a capacity up to 50 kN. The machine is compatible for use with handle for calibration purposes, and a limit switch is provided for the bottom limit of travel.
The machine is supplied without accessories, and it can be equipped both in analogical mode (with load ring and dial gauge) and in digital mode, by using Digimax Pro readout unit (see Page 15 in the brochure linked below) and relevant accessories.

CBR Tester – 50 kN California Bearing Ratio (CBR) Tester

CBR tester is a bench mounted motorized compression frame with compact base unit. The machine is designed to perform California Bearing Ratio (CBR) test and all other compressive tests compatible with a fixed compression speed of 1.27 mm/min, with a capacity up to 50 kN. The machine is compatible for use with handle for calibration purposes, and a limit switch is provided for the bottom limit of travel. The machine is supplied without accessories, and it can be equipped both in analogical mode (with load ring and dial gauge) and in digital mode, by using Digimax Pro readout unit (see Page 15 in the brochure linked below) and relevant accessories.